Ixxat 1.01.0126.12001 CAN bus CAN bus, Bluetooth

Active Bluetooth interfaceThe CANblue II is an affordable universal CAN Bluetooth module, which, with its three modes of operation covers a variety of fields of application.This is, for example, in the service area wireless access to CAN systems via the in notebooks by default included Bluetooth interface. The reading of diagnostic data or the configuration of the system can be very easily and flexibly, even in places that are parts of the plant, can be carried out.Through the use of multiple CANblue II devices can network segments connected to each other. This allows rotating or moving parts, for example, in wind turbines, or it can be connected to a reliable systems even over long distances of up to 200 meters can be networked with one another. Fault-prone gang connections or the expensive laying of cables between distant parts of the plant are thus avoided.Last but not least, the Bluetooth-based communication even in comparison to conventional WLAN solutions decisive advantages in terms of range and noise immunity.The following operating modes are supported:Bridge ModeIn the Bridge operating mode, you can use two CANblue II devices can Bluetooth-CAN bridge can be realized. The message exchange takes place at layer 2 and is transparent. The device can thus be done in systems with CANopen, DeviceNet or customer-specific protocols work. For the data exchange via Bluetooth you CAN ID-filter can be stored. Through the use of more than 2 CA Nblue-Geraten several buses together into a network.ASCII/binary log modeIn this mode, the user has the functions for sending and receiving of CAN messages as well as for configuration of the CANblue II on the basis of simple ASCII commands and optimized CAN binary messages are available. The CANblue II is thus ideal for “non-Windows systems, or embedded platforms.PC operation with VCI driver for WindowsThrough the support of the VCI CAN-driver, the CANblue II with all the IXXAT tools, as well as with customer-specific programs. In addition, the wireless access to CAN systems via Bluetooth with already existing VCI-based application programs and tools in a simple manner possible.This text is machine translated.